Auto glass repair kit Easy

Product code: G02460
EAN code:5901477163494
Brand
None
Unit: kpl.
Unit packaging
opakowanie jednostkowe
A B C Weight
105 40 205 0,060


DESCRIPTION

The Easy auto glass repair kit is perfect for repairing windshields and glass headlamps in an easy, quick and, above all, cheap way. Ideal for removing cracks and chips resulting from, for example, a stone impact. It works well when repairing chipping and small longitudinal cracks by effectively stopping further cracking of the glass. After application and drying, the adhesive becomes transparent, making the repaired area practically invisible.


Product features



  • an easy, quick and cheap way to repair cracks and chipping

  • the set is reusable

  • effectively stops further cracking of the glass, reducing the stress at the crack site

  • After drying, the glue becomes transparent, thanks to which the repaired place is practically imperceptible

  • safe to use


Directions for use:


1. In the case of a circular fracture:


Place the applicator on the glass with the suction cups. The center hole should be above the crack.
Screw the sleeve with the screw into the central hole of the applicator in such a way that its end touches the center of the crack more tightly.
Remove the bolt from the sleeve.
Put the appropriate amount of glue in the applicator.
Screw in and out the plunger several times so that the glue can get into as many corners as possible.
Peel off the applicator.
Apply the protective foil and iron it to avoid glue leakage, it is important that there are no air bubbles under the foil - the glue should dry after a few minutes. After this time, tear off the foil.
Use the attached razor blade to remove the excess glue.
In case of any problems with gluing, the gaps that are not completely filled should be filled with glue again, the glue should be secured with foil and continued according to the previous instructions.



2. In the case of a longitudinal crack:
Place glue along the crack without using the applicator.
Apply a protective foil along the entire length.
The glue should dry after a few minutes. After this time, tear off the foil.
Use the attached razor blade to remove the excess glue.


The effectiveness of the adhesive is greater when it is applied at room temperature. It is recommended to use the product outdoors on a sunny day.


The effectiveness of the product may be limited if the crack is longer than approx. 15 cm, extends along the edge of the glass in two places or is located on the inside of the glass.


Set includes:
Glue dispenser
Ring with suction cups
Repair adhesive
Leveling foils
Razor blade with safe grip
Manuals in Polish
Original packaging



TECHNICAL SPECIFICATIONS

Availability:
We have made every effort to ensure that the above data is correct, but we do not guarantee that the published information does not contain errors, which, however, cannot constitute the basis for any claims.


Related Products



New Products